Resources · ISSR Labs · October 2026

Robot training data in 2026: what it costs, who sells it, and when to build your own.

What teleoperation and first person robot data costs per hour, who sells it, and how to decide between recording it yourself and buying it.

The short answer

  • Data recorded on a robot is the scarce kind. First person video of people is now cheap, and some of it is free. Teleoperation data recorded on a robot body costs about $15 to $150 per hour, depending on the robot and the task.
  • Most teams buy. Vendor benchmarks put the crossover at about 2,000 hours of robot specific data. Below that, a supplier with rigs, operators and QA in place costs less per usable hour.
  • Location changes the price. Operator wages are the largest variable cost, and they vary by country far more than hardware does.

Why robots need this data

Language models learned from text on the internet. There is no equivalent body of recorded physical work. A robot that folds a towel or picks a part from a bin learns from demonstrations of that task, and the most useful demonstrations are recorded on a robot body like its own.

A 2025 Science Robotics editorial put the gap between robot data and language model data at roughly 100,000 years of experience. Scale helps: the EgoScale study (February 2026) pretrained a robot policy on 20,854 hours of first person human video and raised the average success rate of a 22 degree of freedom robot hand by 54% over a model without that pretraining.

Three kinds of robot data

XDOF, which launched in June 2026 with $70M, ranks data in three tiers, from most to least valuable:

  1. Teleoperation on the robot you will deploy. An operator controls the robot through a VR headset or a leader arm, and the robot records its own cameras and joints. The model learns from its own body.
  2. Teleoperation on a general purpose robot, such as a Unitree G1 humanoid or a two arm station. Useful for pretraining and for teams running the same platform.
  3. First person (egocentric) video of people doing the task with their own hands. Cheap and varied, but the model must learn how human hands map to robot hands.

What a teleoperation recording contains

SignalDetail
Camera streamsHead camera, plus wrist cameras where fitted
Joint statesEvery arm, wrist and finger joint, 30 to 50 times a second
ActionsThe command sent to each joint at each step
Hand stateOpen or closed; touch readings where the hand has sensors
LabelsTask name, success or failure, optional language instruction

Buyers usually ask for delivery in LeRobotDataset v3 or RLDS.

What robot data costs

Vendors price raw hours, usable hours and annotated hours differently. Ask which one a quote means.

Data typePer hourNotes
Single arm teleoperation (pick and place)$15 to $306 to 12 demonstrations per hour
Two arm (bimanual) teleoperation$40 to $802 to 4 demonstrations per hour; 70 to 85% accepted
Full humanoid, multiple sensors$80 to $1501 to 3 demonstrations per hour
First person video, raw$25 to $40About $60 with dense annotation
Annotation on top$8 to $25Per data hour; language labels low, masks and contact high

Sources: DataXPower and DexSet. Both are data vendors; treat the figures as indicative.

Compare cost per usable hour. A $40 raw hour with 25% of takes rejected costs $53 per usable hour. DexSet describes a buyer who accepted a $35 quote, measured 28% rejection on a 200 hour pilot, and paid $48.60 per usable hour. Run a paid pilot and measure rejection before ordering volume.

Who sells robot data

CompanyWhat they sellFunding
XDOFRobot teleoperation and first person data, cleaning, annotation; about 20 customers$70M
Scale AI Physical AITeleoperation, first person capture, annotation, model validationEstablished vendor
Mecka AIHuman motion data from body sensors and phones$60M Series B, led by Sequoia
ConfigTwo arm robot data plus its own model$27M seed
Human ArchiveFirst person video from service workers in India; 1,000+ headsets$8.2M seed
Build AIFirst person factory video; large free datasets on Hugging FaceAbout $15M
China’s data training centresHumanoid teleoperation in mock homes, factories and care roomsAbout 40, funded by local governments

Config and Build AI figures: DreamVu’s 2026 landscape, written by a data vendor.

Investment is going to data recorded on robots. First person video is now widely available, with at least one company releasing it free, and China funds data centres as shared infrastructure.

Data collection rigs on sale from robot makers

Robot makers now sell hardware and software for recording training data, not only robots for work. Of 18 makers we checked in October 2026, five sell a dedicated data collection product and four market data collection as a capability.

  • Dobot ATOM D: a humanoid variant named “Data Collection”, for large scale data tasks.
  • Galaxea R1 Lite: a two arm mobile platform listed by Galaxea as a data collection platform; Galaxea’s 100,000 trajectory open dataset was recorded on it.
  • AgileX Cobot Magic: a two arm teleoperation platform on the Mobile ALOHA design, with leader and follower arms.
  • Trossen ALOHA kits: two arm kits built for long data collection runs, with LeRobot support.
  • AgiBot: a VR teleoperation kit for its A2 humanoid, and its own data centre in Shanghai.

Unitree publishes XR teleoperation software with recording for the G1 and H1, and Fourier, Booster and Astribot market teleoperation for data capture. Tesla, Figure, 1X, Agility and Apptronik record teleoperation data for their own models only.

Buying a rig gets you hardware. Operators, scenes, QA and consent are still yours to build.

Build or buy

Costs for one in house teleoperation station, from published figures:

ItemCost (US based team)Basis
Robot$44,000 to $84,000Programmable Unitree G1, by hand and sensor configuration (ZMProbots, botinfo.ai)
Teleoperation rig and cameras$20,000 to $32,000ALOHA and Mobile ALOHA papers, via DexSet
Hardware per hour$10 to $18Robot and rig over 18 months of two shift use, before repairs
Operator wages$18 to $38Per hour, DexSet
QA and recording again$6 to $12Per hour, DexSet
Per raw hour$34 to $68Before space, engineering and downtime
Per usable hour$43 to $85At 20% rejection

Not in the table: engineers to keep robots calibrated and the pipeline running, space for mock environments, downtime when a joint or hand fails, and operator ramp up. Vendors report operator throughput rises 30 to 50% over the first 200 hours.

Build when you need fewer than about 2,000 hours, the data is specific to a robot only you have, and you already have the robots and engineers. Many teams run one internal station for experiments and buy volume.

Buy when you need volume, speed or a range of settings, or your robot is a common platform such as the G1. You pay for accepted hours only.

Why location matters

Operator wages are the largest variable cost: $18 to $38 an hour for US based teams. Robot hardware costs about the same everywhere. Recording the same robot, task and QA standard where operator wages are lower, such as India, lowers the cost per usable hour.

Before you buy robot data

  1. Embodiment. Is it recorded on your robot, or one close enough to transfer? Ask for the exact model and hand.
  2. Usable hour price. Measure rejection on a paid pilot.
  3. Format. LeRobot v3 or RLDS, with synchronised timestamps and calibration files.
  4. Task definition. Who writes the success criteria, and who accepts a take?
  5. Rights. Exclusive or non exclusive? Can the supplier resell the dataset?
  6. Consent. Everyone who appears in the data or operates the robot should have signed consent. In India, the Digital Personal Data Protection Act, 2023 applies.
  7. Security. How the data is stored, transferred and deleted.

How ISSR Labs works

ISSR Labs records robot training data at its lab in Visakhapatnam, India, on a Unitree G1 with dexterous hands and an AgiBot A3, with trained operators, mock environments and a pipeline that exports LeRobot v3 or RLDS. Every contributor signs documented consent, and every dataset ships with its recording metadata.

  1. Recording to order. Your robot or ours, your task and success criteria. The data is exclusively yours. We can host your robot.
  2. Ready made datasets. Standard kitchen, warehouse, retail and workbench tasks on our platforms, licensed non exclusively.
  3. Capture capacity for data companies. An India site with robots and operators, recording to your specification.

How a sample dataset is collected   Robot data at ISSR Labs

FAQ

How much does humanoid robot training data cost?

Published 2026 rates run from about $15 per hour for single arm teleoperation to $80 to $150 per hour for full humanoid recordings with multiple sensors. Compare the price per usable hour, after rejected takes.

Is it cheaper to build my own robot data fleet?

Usually not below about 2,000 hours of robot specific data. One station costs about $64,000 to $116,000 in hardware before operators, QA, engineering, space and downtime. Buying means paying only for accepted hours.

What is the difference between teleoperation data and egocentric data?

Teleoperation data is recorded on a robot while a person controls it, so it captures the robot’s own cameras and joints. Egocentric data is first person video of a person doing the task with their own hands; it is cheaper, but the model must translate human motion to robot motion.

What format should robot training data be delivered in?

Most buyers ask for LeRobotDataset v3 or RLDS, with synchronised camera, joint and action streams and calibration files.

Can I get data for a specific task or robot?

Yes. Custom recording to your task and success criteria is the most common arrangement. Ask whether the supplier can record on your exact robot or host it.

ISSR Labs

Planning a robot data programme?

Tell us the robot, the task and the volume, and we will reply with a recording plan.

Contact

Talk to ISSR.

Tell us what you have in mind: a demo, a programme, a research project, an integration pilot or a purchase. We reply within one working day.

    We reply within one working day.