ISSR Systems

Robot and humanoid integration for Indian industry.

No capex. Just a monthly fee attached to a clear productivity SLA. ISSR evaluates the task on your floor, deploys the robot system, and operates and maintains it after go live.

Building robots is no longer the hard part. Getting value from them is.

ISSR is a robot integrator: we bring robots into more of business and everyday life, and make them pay for themselves.

01 · Full Service

One monthly contract for the robot, the deployment and the running of it.

Full Service bundles the robot system, deployment, operation, maintenance and production data under one monthly contract.

How it works: four stages.

Scope

Onsite evaluation of the task, 1 to 2 weeks.

Schedule an onsite evaluation

Pilot

Feasibility pilot of about 60 days, ending in a go or no go report.

Build

Integration with your line and deployment of the robot system.

Run

Monitoring, maintenance and software updates for the length of the contract.

Fleet monitoring and production data.

  • Fleet monitoring of every deployed robot
  • Remote diagnostics by ISSR engineers
  • Production data shared with your team

Engineering

An engineer checking production data on a tablet
A humanoid robot under test

Robot platforms ISSR has integrated.

  • Unitree G1 humanoid
  • AgiBot A3 humanoid
  • Modular grippers and fixtures chosen for each task
02 · Solutions

Solutions by task.

Material handling and palletisingMoving, stacking and palletising cases, cartons and totes.

Why now

End of line palletising in many Indian plants is still done by hand, with workers lifting cartons for a full shift.

It is often the first task a plant hands to a robot, because carton sizes, pallet patterns and line speeds are known in advance.

Configurations

Collaborative palletising cell

  • Lighter cartons at moderate line speeds
  • Compact footprint where floor space is short
  • Reduced fencing where the risk assessment allows

Industrial palletising cell

  • Heavier loads and faster lines
  • Fenced cell with light curtains
  • One robot serving two pallet stations

Pilot

  • Scope: a single task, a single cell and a single shift
  • Basis: monthly contract, quoted after the onsite evaluation
  • Length: about 60 days, ending in a go or no go report

What is included

  • Deployment and integration with your line
  • Monitoring of the robot during every shift
  • Software and behaviour updates
  • Preventive maintenance and repairs
  • Support from ISSR engineers

Discuss a pilot

Pick, place and packingItems into cartons, trays and totes at line speed.

Why now

Robots that pick items and place or pack them into cartons, trays and totes.

Pilot

A pilot covers a single task on a single shift, on a monthly contract quoted after the onsite evaluation.

What is included

  • Deployment and integration with your line
  • Monitoring of the robot during every shift
  • Software and behaviour updates
  • Preventive maintenance and repairs
  • Support from ISSR engineers

Discuss a pilot

Machine tendingLoading and unloading CNC machines, presses and moulding machines.

Why now

Robots that load and unload CNC machines, presses and moulding machines, so operators can run more machines per shift.

Pilot

A pilot covers a single task on a single shift, on a monthly contract quoted after the onsite evaluation.

What is included

  • Deployment and integration with your line
  • Monitoring of the robot during every shift
  • Software and behaviour updates
  • Preventive maintenance and repairs
  • Support from ISSR engineers

Discuss a pilot

Inspection and patrolSet route checks across plants, warehouses and ports.

Why now

Robots that follow a set route through plants, warehouses and ports, check equipment and report what they find.

Pilot

A pilot covers a single task on a single shift, on a monthly contract quoted after the onsite evaluation.

What is included

  • Deployment and integration with your line
  • Monitoring of the robot during every shift
  • Software and behaviour updates
  • Preventive maintenance and repairs
  • Support from ISSR engineers

Discuss a pilot

MedTech assembly supportRepetitive assembly, handling and packing steps in medical device production.

Why now

Robot support for repetitive assembly, handling and packing steps in medical device production.

Pilot

A pilot covers a single task on a single shift, on a monthly contract quoted after the onsite evaluation.

What is included

  • Deployment and integration with your line
  • Monitoring of the robot during every shift
  • Software and behaviour updates
  • Preventive maintenance and repairs
  • Support from ISSR engineers

Discuss a pilot

Humanoids (early access)Humanoid pilots on tasks built for people, in Indian plants.

Why now

Many tasks in Indian plants sit in spaces designed for people: shelves, carts, doors and stairs. Humanoids can work in those spaces with few changes to the line.

The hardware is new, so ISSR runs humanoid work as early access pilots with a narrow task and close supervision.

Configurations

Bipedal humanoid: Unitree G1

  • 1320 mm tall, about 35 kg (manufacturer data)
  • 23 to 43 degrees of freedom, depth camera and 3D LiDAR
  • Patrol routes, inspection rounds and light carrying

Stage and interaction humanoid: AgiBot A3

  • 173 cm tall, 55 kg (manufacturer data)
  • Up to 10 hours with hot swappable dual batteries
  • Reception, guided tours and public interaction

Pilot

  • Scope: a single task, a single cell and a single shift
  • Basis: monthly contract, quoted after the onsite evaluation
  • Length: about 60 days, ending in a go or no go report

What is included

  • Deployment and integration with your line
  • Monitoring of the robot during every shift
  • Software and behaviour updates
  • Preventive maintenance and repairs
  • Support from ISSR engineers

Discuss a pilot

In development

Capabilities coming next

Mobile manipulation between stations and bimanual humanoid tasks. If your task is not listed, describe it to an engineer.

Talk to an engineer
03 · Engineering

How the systems work.

What runs on each robot, what runs across the fleet, and how the two connect to your plant.

Perception, manipulation and control.

Each robot runs its own perception and control, so it keeps working if the network drops.

  • Perception: cameras and LiDAR locate parts, boxes, obstacles and people
  • Manipulation: grippers and motion planning for the task in the cell
  • Deterministic control: ROS2 control loops with fixed timing
  • Safety: geofenced zones and safety rated stops
  • Teleoperation captures demonstrations from ISSR operators
  • Robots learn new tasks from those demonstrations
  • ROS2 control on every robot ISSR deploys

Data from every deployment.

Every deployed robot reports to the ISSR fleet layer.

  • Production and fault data collected from each robot
  • Remote diagnostics by ISSR engineers
  • Software and behaviour updates rolled out to the fleet
  • Teleoperation data that trains new tasks

From robot hardware to your plant systems.

Modelled in simulation before the hardware arrives.

A cell can be built as a digital twin in MuJoCo, Gazebo or Isaac Sim to check reach, layout and cycle time before installation.

Two cobots on a conveyor line
Palletising cell
Fillet welding cell
Humanoid tote handling

By the numbers: 2 humanoid platforms integrated: Unitree G1 and AgiBot A3.

An ISSR engineer walks your team through the stack for your task, including safety and integration with your systems. Request a technical briefing

Robots as a Service

Robots as a Service.

ISSR owns the robot. You pay a monthly fee tied to an agreed output, such as cases palletised, hours operated or areas inspected. ISSR installs, operates, maintains and upgrades the system. The contract can grow by adding robots, or end at term.

Who it suits: companies that want automation without capital spend, and founders testing a robot based business before committing to buy.

What is included
  • Robot hardware
  • Integration and safety setup
  • Operator training
  • Monitoring and maintenance
  • Software updates
  • Replacement unit if a robot is down
04 · Who we work with

Between the businesses that use robots and the companies that make them.

Entrepreneurs and small businesses. Test a robot based business idea, such as a robotic café, a cleaning service or an inspection service, on ISSR robots before buying any: use case evaluation, a pilot on ISSR hardware, then Robots as a Service.

FAQ

Questions.

General

How is it priced?

On a monthly contract, quoted after the onsite evaluation.

How do we start?

Book an onsite evaluation. A pilot follows on a single task and a single shift.

Material handling and palletising

How long does a palletising pilot take?

About 60 days after the onsite evaluation, on a single task, a single cell and a single shift.

Can one cell handle more than one carton size?

Yes. A pallet pattern is programmed for each product and selected at the line.

Do we need to change our line?

Usually only the infeed conveyor and the pallet station. The onsite evaluation confirms what changes.

Who maintains the robot?

ISSR does, with preventive maintenance and remote diagnostics.

What happens if the robot stops?

Your team can switch the station to manual palletising while ISSR engineers diagnose the fault, first remotely and then on site.

Pick, place and packing

What items can the robot pick?

Items with a consistent shape and a surface a gripper or suction cup can hold. The onsite evaluation tests your items.

Can it keep up with our line?

The evaluation measures your line rate and recommends a cell sized for it.

Machine tending

Which machines can be tended?

CNC lathes and mills, presses and moulding machines with a door or opening the robot can reach.

Does the robot need to talk to the machine?

Usually yes, through the machine door and cycle signals. The evaluation checks what your machine supports.

Inspection and patrol

What does the robot check?

Gauges, indicator lights, leaks, obstructions and people in restricted zones, depending on the sensors fitted.

Can it work at night?

Yes. Patrol routes can be scheduled for any shift.

MedTech assembly support

Which steps suit a robot?

Repetitive handling, simple assembly, tray loading and packing steps with consistent parts.

Can the robot work in a cleanroom?

Cleanroom suitability depends on the robot and your cleanroom class. The evaluation confirms it.

Humanoids (early access)

Which humanoid tasks are ready today?

Patrol routes, inspection rounds, light carrying, reception and demonstrations. Heavy or precise manipulation is still in development.

How long does a humanoid pilot take?

About 60 days after the onsite evaluation, on a single task in a single area.

Is it safe to run a humanoid near workers?

The robot works in a marked zone, with an ISSR operator present during the pilot and safety stops in place.

How long does the battery last?

Unitree rates the G1 at about 2 hours per battery. AgiBot rates the A3 at up to 10 hours with its dual battery packs.

Do our staff need training?

ISSR trains your operators during the pilot. ISSR Academy also runs humanoid programming certification.

Can we buy the humanoid?

Purchase can be discussed. Most clients start on a monthly contract.

Onsite evaluation

What does the evaluation cost?

The cost depends on the site and the scope of the task. We confirm it when you book.

How long does it take?

The floor walk and demonstration take a day on site. The written plan follows within 1 to 2 weeks.

Who needs to attend?

The person who owns the line, a maintenance lead and someone from safety.

What should we prepare?

Sample parts or cartons, current output per shift, and the layout of the area.

What happens next?

If the plan makes sense for you, we agree a pilot on a single task and a single shift.

Do you travel outside Visakhapatnam?

Yes, anywhere in India. Travel is included in the evaluation quote.

05 · Case studies

Each ISSR deployment is documented as a teaching case and used in ISSR Academy programmes. ISSR Academy

What happens next

From your enquiry to a scoped system.

  1. You send the formAn ISSR engineer reads it within one working day.
  2. Discovery callThirty minutes on your operation, the task and what success looks like.
  3. Scoped proposalThe system specification, deployment timeline and monthly fee, in writing.

Prefer to talk first? Email info@issr.co.in.

    We reply within one working day.